Slash pads (What is the feeling of shaking when you step on the brakes when you step on the brake? Just change the other side is the quality problem of the brake pads?)

Regarding the question of brake pads, today I will answer you to answer you
aken. The editor of this site answered:

The premise of the car replacement of the brake pads is the degree of wear of the brake pads. Generally speaking, the front wheel brake pads of the car The degree is greater than the degree of wear of the rear wheels. The replacement of the brake pads can be replaced according to the degree of wear of the front wheels, and the rear wheels can not be replaced.

Netizen's point of view:

brake pads will not cause jitter. Most of the reasons for jittering are because the brake disc alternated under high temperature or after the CD -ROM has caused the brake disc processing, which has nothing to do with the brake pads. As for why you change it, it is estimated that the latter is very compressed, and the product can absorb the warning and deformation of the brake disc. In the original car supporting standard, compression is an important project. It is required to be compressed between 0.1 and 0.2 mm under normal brakes, so as to ensure the reaction of brake pads under emergency braking conditions under emergency brake conditions. speed. Therefore, comprehensive consideration is as high as above, if you just change the brake pads, you may not be happy.

 Yes.

Ceramic brake pad is a composite material of silicon carbide ceramic, which has the characteristics of ceramics. At the same time, due to composite treatment, it also has the advantages of light quality and strong strength.

Ceramic brake pads have good thermal stability and low heat transfer. Under many high -performance braking conditions, these are very important. For long -term driving and braking The improvement of safety, the braking noise is small.

ordinary brake pads are easy to produce heat recession due to high heat under full braking, and ceramic brake pads can effectively and stabilize the heat recession. In the initial stage of braking, the maximum braking force can be generated, so there is no need to brake assist to increase the system, and the overall brake is faster and shorter than the traditional brake system. Ceramic brake pads have extraordinary durability. If normal use is avoided for life, ordinary brake pads are generally replaced in the last few years.

If the brake pads of the car appear abnormally wear, you need to check the car's brake system. It may be that the brake split pump in the brake system is not normal, causing the brake pads to be caused by abnormal wear caused by the brake disc. The brake pads are the most important safety parts in the car brake system. It is mainly composed of steel plate bonding the heat insulation layer and friction block. Among them, the steel plate should be rusted by coating. Composition of friction materials and adhesives. The effect of the car brake depends on the quality of the brake pads. During the brakes of the car, the brake pads are squeezed, rubbing on the brake disc and brake drums, so that the car achieves the purpose of deceleration and brakes. Because the brake pads do the friction, the friction block will gradually be worn and need to be replaced regularly.

 1. The meaning of the brake pads does not include decoding means that the decoded instrument needs to be used to replace the brake pads, because the electronic brake split pump piston is controlled by electricity during design. You can control the electronic pump back by the decoder to replace the brake pads.  2. The electronic split pump for general high -end vehicle needs to be decoded. The brake system of the car is very important. The brake system is related to the safety and stability of the car. After the driver is stepped on the brake pedal, the vacuum help pump will provide a help, which can help the driver to step on the brake pedal, and then the brake pump will promote the braking split pump by the brake oil, and then the brake sub -pump will promote the brake pads. Clamp the brake disc so that the car can slow down. During the braking process, the brake skin and brake discs will continue to wear, so after using a certain mileage, the brake pads and brake discs need to be replaced.