Address:Gangcheng East Ave, Laishan District, Yantai City
WhatsApp/Wechat:
Fax:86--xxxxxxxxxxxxxxxx
E-mail:sales#okmadintl.com
Your Position: HOME > Industry > Ask about the production process of brake pads?(Please ask the production process of the brake pads?)
IndustryIndustry[Bad pad production process]
1, mixed raw materials: Basically, the brake pads are from steel fiber, mineral cotton, graphite, wear -resistant resistance The agent, resin and other chemicals are composed, and the friction coefficient, wear -resistant index and noise value are adjusted through the proportion of these raw materials.
2, thermal formation stage: pour the mixed raw materials into the mold, and press it down.
3, iron processing: After tailoring of the iron materials of different models, it is necessary to use the bead to hit the surface hardly to prepare the prototype of the brake pads.
4, thermal pressure molding stage: The use of machinery is used to compress the iron material with the brake pads high, so that the two can be more closely integrated, and the finished product is called the brake pad coarse embryo.
5. Thermal treatment phase: In order to make the material of the brake pads more stable and the heat resistance is higher, it is necessary to heat the coarse embryo of the brake pads through this heat treatment machine for more than 6 hours before processing.
[brake pad production process]
6, grinding and cutting stage: The surface of the brake pads after thermal treatment still requires multi -wool edges, so it needs to be grinded and cut to make it flat.
7, spray paint stage: In order to avoid iron rust and achieve a beautiful effect, Therefore, lacquer work needs to be carried out.
8. After the paint is finished, you can process the alarm or fixed device on the brake pads and prepare packaging.
1. Mixed raw materials: Basically, the brake pads are composed of steel fiber, mineral cotton, graphite, wear resistant, resin and other chemicals. The size of the noise value is adjusted through the proportion of these raw materials.
2, thermal formation stage: pour the mixed raw materials into the mold, and press it down.
3, iron processing: After tailoring of the iron materials of different models, it is necessary to use the bead to hit the surface hardly to prepare the prototype of the brake pads.
4, thermal pressure molding stage: The use of machinery is used to compress the iron material with the brake pads high, so that the two can be more closely integrated, and the finished product is called the brake pad coarse embryo.
5. Thermal treatment phase: In order to make the material of the brake pads more stable and the heat resistance is higher, it is necessary to heat the coarse embryo of the brake pads through this heat treatment machine for more than 6 hours before processing.